We SOLUTION EPG have developed an oil bath system inside the gearbox which is therefore able to guarantee those characteristics of speed, duration, continuity and safety customers asked for.Additionally, all our production procedures are in compliance with ISO9002 standards for a specialized supplier of a full range of chains, sprockets, gears, gear racks, V-belts, couplings and reducers， pto shaft, agricultural gearboxes….- EPG Group the biggest agricultural gearbox and pto factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
Main products include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing film, plough tip and share, cultivator tine, casting parts etc.Established in year 1997, EPG is a well-known Manufacturer ,Wholesaler and Retailer of Agricultural Gearbox,Inline Helical Gearbox and Screw Jacks and more. All these products are quality assured by the quality assurance executive to ensure perfect qualities and longer life. Highly demanded in different industries, these products are accessible from the market in different shapes, sizes and configurations.
Automatic auto spray for cold chamber die casting machine (160t-3000t).
1. Main parts and electric components are imported from other countries (JAPAN NSK bearing, JAPAN Septor JAPAN CKD solenoid and cylinder, USA ACE bumper, JAPAN CKD filter) to ensure low failure rate and long service life of machine.
2. The application of rotary joints makes the movement curve of air pipe and water pipe more reptable. The filter is adopted to eliminate the impurity in the mixed fluid, by which the fault rate of equipment is reduced and the service life will be extended.
3. Not only can it be automatically work independently, but also can be connected with die-casting machine, Ladling Unit and extraction machine to become an integral part of full automatic equipment.
4. The spray time, spray amount and blowing time to static mould or moveable mould can be adjusted separately, so the dope is saved and the casting quality is improved.
5. Can blow air at the time of that the machine goes up after the completion of operation to remove the dirt on the mould surface and to keep the mould surface clean.
6. The dosage of mould release agent is adjustable.
7. The up/down speed is much stable. The speed can be decelerated during rapid falling, which will extend the service life of dumper. The up/down speed can be adjusted. The anti-falling device can prevent the spray nozzle from falling in case of that the compressed air source is shut off.
8. The john deere 709 gearbox Al-Mahallah al-Kubra Egypt intermediate spray can be added in accordance with the requirements of customers, by which two kinds of mould release agents can be applied to enhance the mould release effect.
9. Equipped with English HMI, it is easy to setup all parameters, the machine can be monitored in real time and the faults can be displayed after self-diagnosis, so it is convenient for operation or maintenance.
|For Die Casting Machine||125T-200T||250T-400T||450T-550T||630T-1000T|
|Number Of Brass||>35PCS||>40PCS||>70PCS||>80PCS|
|The Base Stroke||250mm||250mm||400mm||400mm|
|Compressed Air Pressure||5BAR||5BAR||5BAR||5BAR|
|Power Supply Capacity||380V/0.75KV||380V/0.75KV||380V/1KV||380V/1KV|
PS:WE RESERVE THE RIGeptTO MAKE ANY TECHNICAL IMPROVEMENT WITHOUT FURTHER NOTICE
HangZhou XiHu (West Lake) Dis.Hu (West Lake) Dis.a , founded in 1982, is a professional high-tech enterprise engaged in the design, manufacture and sale of cold chamber die casting machines, die casting peripheral equipments, oil field equipments and new energy equipments (natural gas, nitrogen, epthead, casing, raw materials, liquefied petroleum gas, special gas, compressor).
On November 7, 2017, XiHu (West Lake) Dis.Hu (West Lake) Dis.a won the national high-tech enterprise certificate!
On June 26, 2019, XiHu (West Lake) Dis.Hu (West Lake) Dis.a was successfully listed in the National Science and ept Innovation Special Edition!
Longua intelligent die-casting machines are applicable to manufacture of autoMobile: +86~13083988828 13858117778083988828 and motorcycle parts (engine cylinder block, cylinder head, crankcase, hinged door covers, oil pan, gearbox housing, gearbox end cap, dashboard, etc.), electric escalator handrail/steps, industrial/road/railway/air/agricultural machinery, spotligeptshells, building material parts, furniture, aluminum arts, copper arts, magnesium alloy products, non-ferrous metal processed products and other die casting products.
XiHu (West Lake) Dis.Hu (West Lake) Dis.a die-casting machine and oilfield equipment products are exported to: Brazil, Egypt, South Africa, Vietnam, Pakistan, Bangladesh, Uruguay, India, Russia, kazakhstan, kyrgyzstan, Ukraine, Japan, Ecuador, the United States,South Korea, Algeria, China ZheJiang and other countries and regions.
XiHu (West Lake) Dis.Hu (West Lake) Dis.a’s quality goal is that “Today’s quality means tomorrow’s market”.
Cooperative R&D Unit
XiHu (West Lake) Dis.Hu (West Lake) Dis.a intelligent die casting machine is jointly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed with HangZhou institute of material science, Chinese academy of sciences, with automatic system upgrade, one-click operation, zero fault, maept die casting more efficient, more precise, more intelligent and more durable.
We warmly welcome friends from all over the ept to visit our factory
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.