We In addition, WE CAN Generate Customized VARIATORS, GEARED MOTORS, Electric powered MOTORS AND OTHER HYDRAULIC Products In accordance TO CUSTOMERS’ DRAWINGS.- EPG Group the most significant agricultural gearbox and pto factory in China with five distinct branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
China model harvester
one.Geared up with turbocharged engine 64.7kw with much better energy and reduced gasoline intake.
two.ZKB65 hydraulic gearbox with 40C HST ensures harvester wor ept more smoothly.
3.Rubber observe 450x90x51mm brings less ground clearance.
4.The length of threshing cylinder reaches 2050mm, which helps make grain considerably less loss.
5.Reverse system is the very best answer to resolve block of conveyor.
6.Min. Ground clearance reaches 300mm, harvester can work in deep mud fields.
|Feeding Capacity (kg/s)||4|
|Work Dimension L*W*H (mm)||4900*2890*2700|
|Cabin/Sunshine shade||Sun shade|
|Motor Component||Design No.||Changchai 4L88|
|Fuel||Gentle Diesel Oil|
|Fuel Ability (L)||one hundred thirty|
|Gear Box||ZKB65 created by ept Manufacturing unit.|
|HST||40CC HST Imported from south Korea.|
|Wal ept Portion||Rubber Track||Duration of Floor Contact (mm)||1700|
|Centre Length (mm)||1160|
|Typical Make contact with Pressure (kpa)||≤20Kpa|
|Min. Floor Clearance (mm)||300|
|Gear Shifts||Variable Sun-transmission three Shifts|
|Wander Velocity (Km/Hour)||Minimal:~one.eighty five Medium:~six.5 Large:~9|
|Theoretical Function Speed (Km/Hour)||.9-6.5|
|Harvesting Device||Grain Lifter||Divider|
|Wor ept Width (mm)||2200|
|Reel Bat||Dia. × Size (mm)||∮900×2571|
|Gearshift tiller gearbox Florence Italy Method||Continuous Velocity|
|Stubble Top[Lift] (mm)||25cm or above|
|Threshing &Harvesting Unit||Threshing Method||Axial Circulation Variety, Bullet Rotor|
|Threshing Rotor||Kind of Threshing||Beat Bar|
|Dia. ×Length (mm)||∮620*2050|
|Separating Kind||Vibrating Sieves +Air Blow|
|Region of Sieves (Lowe and Higher Sieves) (m2)||1.645|
The use of original equipment manufacturer’s (OEM) component numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our organization and the listed substitute areas contained herein are not sponsored, approved, or manufactured by the OEM.