We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 diverse branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Large efficiency dress in resistance horizontal ash slurry pump
Introduction:
1. HS series slurry pump is created for the continuous pumping of high abrasive, higher density slurries with minimal routine maintenance needs. The donning areas are created of extremely chrome or and rubber. It will preserve high performance more than the dress in daily life of its components.
two. The metal moist components and rubber ones can be interchangeable for dealing with different liquids or slurries.
three. HS slurry pumps are available in measurements ranging from 1 inch to 18 inch discharge and attribute substantial effectiveness functionality capable of flow rates from ten.8 to 5400 m³/h and heads up to a hundred twenty five meters for higher head models.
Characteristics:
1. Cylindrical construction of bearing assembly: convenient to adju EPT the room amongst impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
two. Interchangeable anti-abrasive moist components produced of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs supply substantial functioning stress abilities
and an added measure of safety.
four. The discharge department can be oriented to any eight positions at the interval of 45 levels
5. Numerous push types: DC(direct relationship), V-belt push, equipment box reducer, hydraulic couplings, VFD,
S EPT control, etc
6. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Development |
| • Alumina Market | • Energy Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Focus | • Gold mine | •Molybdenum |
| Design | Max Power (Kw) |
Inlet & Outlet size (inch) | Substance for Wear Components | Movement Price (Q) | Head (H) meter |
Velocity (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/one | M | twelve.6~28.8 | 3.5~eight | 6~68 | 1200~3800 | 152 |
| R | 10.8~twenty five.two | three~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.4~seventy two | nine~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | 25.2~fifty four | seven~fifteen | 5.5~forty one | one thousand~2600 | 178 | |||
| 50HS-C | 30 | 3/two | M | 39.6~86.4 | eleven~24 | 12~sixty four | 1300~2700 | 214 |
| R | 36~seventy five.6 | 10~21 | 13~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/three | M | 86.4~198 | 24~55 | 9~fifty two | a thousand~2200 | 245 |
| R | seventy nine.2~180 | 22~fifty | five~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | 40~a hundred | twelve~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | forty~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/6 | M | 360~828 | a hundred~230 | ten~sixty one | 500~1140 | 510 |
| R | 324~720 | ninety~two hundred | 7~forty nine | 400~1000 | 510 | |||
| 200MS-E | one hundred twenty | 10/eight | M | 666~1440 | 185~400 | 14~sixty | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | one hundred seventy~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | 12~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | twelve/ten | M | 936~1980 | 260~550 | 7~sixty eight | 300~800 | 762 |
| R | 720~1620 | 200~450 | 7~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~700 | thirteen~44 | 300~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | 11~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | 20/18 | M | 2520~5400 | seven-hundred~1500 | 13~fifty seven | two hundred~four hundred | 1370 |
| 25HHS-C | thirty | 1.5/one | M | sixteen.2~34.2 | four.5~9.5 | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/3 | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | a hundred and twenty | 6/4 | M | 324~720 | ninety~two hundred | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/6 | M | 468-1008 | 130~280 | twenty~94 | 500~a thousand | 711 |
For the material of putting on components,
“M” = steel, ultra chromium alloy “R” = anti-abrasive rubber
Get in touch with
Welcome to contact us any time for particulars.
Your inquiry will get our prompt interest and response !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 distinct branches. For much more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique gear manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating solution use and compatibility. Our firm and the shown replacement areas contained herein are not sponsored, approved, or manufactured by the OEM.
