Materials Dealing with Electrical power UNIT two
This power unit functions energy up gravity down circuit. Activate the get started solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the decreasing speed managed through the pressure compensated flow control valve. Merchandise of this series might be extensively utilized in the marketplace of logistic gadgets like fork lift, mini lift table, and so on.
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned in advance of mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and cost-free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is needed after the first a hundred operation hours,afterwards once every single 3000 hours.
5. The energy unit ought to be mounted horizontally.
Materials Dealing with Energy UNIT one
This energy unit is made for that fork lift marketplace, consisting of extremely productive gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down movement are controlled through the lever from the manual release valve, that is outfitted with an electric switch to activate the motor. The lowing speed is controlled through the pressure compensated flow manage valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned just before set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and no cost of impurities, N46 hydraulic oil is proposed .
four. Oil altering is needed right after the initial a hundred operation hrs, afterwards as soon as every single 3000 hrs.
5. The power unit proven is built to be mounted horizontally.