one.A connecting link of an O-ring Chain for standard application is pre-coated with grease on the pins. Ahead of connection, confirm the grease over the surfaces of pins, and in case the volume of grease is compact, apply grease with bare hands. (If gloves are used, the grease are going to be absorbed from the gloves.)
Illustration: Once the connecting link (I) of an O-ring chain for general application is
shipped, O-rings are fitted with the roots from the pins. If the O-rings come loose as a consequence of vibration throughout transport, refit the O-rings in for the roots of the pins.
In this case, you’ll want to return the grease collected on the roots of the pins for the central surfaces with the pins, more at portion A than at portions B proven in the over illustration. (Portions A is worn as a consequence of sliding using the bushings.)
2.The chain can be most conveniently connected around the teeth of the sprocket. Engage the links at each ends on the chain with all the sprocket teeth and match connecting pins. Should the sprocket can be moved, the chain may also be linked to the loosened side.
three. Connecting method
1.Verify that O-rings are attached for the roots of your pins.
two.In case the amount of grease applied around the connecting pins is little, coat the pins with grease in the central portions.
3.Insert the connecting pins to the bushings of the inner backlinks at the two ends.
four.Confirm that the grease is applied to the complete encounter with the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and even though pressing the connecting plate, install the spring clip. Confirm no matter whether the head (the finish without a split) in the spring clip is turned in the feeding course in the chain. (See the next illustration.)
six.Make sure you verify that the spring clip is securely fitted in the clip grooves of the connecting pins.
This completes jointing on the connecting link. Note that grease within the surfaces of connecting pins and O-rings may be eliminated for the duration of set up perform. In this instance, re-grease working with the grease about the surface of your base chain or the grease inside the polyethylene bag through which the connecting hyperlink was contained.