Highest put on resistance accessible by sealing grease in between pins and bushings
The durability of chain is drastically improved considering the fact that grease is sealed between the pins and bushings by O-rings. The O-ring chain would be the most dependable model of your Ultimate Lifestyle Chain Series with its superb wear resistance even while in the circumstances or environments the place chain upkeep is challenging.
Suggested makes use of.
?Situations exactly where frequent chain substitute is required because of wear stretch
?Conditions exactly where lubrication through the service is not possible
?In an natural environment with a lot soil, sand, dust, and so forth.
?Applications that require power greater than that of a sintered bushing roller chain
Other attributes
?Lowering noise. (The noise level is three dB reduce in contrast to conventional roller chains.)
?Cutting down vibration with the friction created by O-Ring. (The energy reduction as a result of friction is almost negligible, since the frictional force between the pins and bushings is for commonly during the applications.)
Choice of chains
The power of an O-ring chain is almost the same as that of the normal roller chain. (Because the pins are longer than individuals of common roller chain, the typical rupture strength is slightly reduce.)
For picking out a suitable chain, refer to “Selection of Chains” .
When the services ambient temperature is larger than 80° C, specific heat resistant O-rings has to be made use of. In this case, contact us for additional details.
Connecting hyperlinks and offset back links
Two varieties of connecting backlinks can be found: clearance match and interference fit. When large strength or durability is needed, use interference-fit connecting link. Only 2POJ is available because the offset link for all sizes.
Sprockets
O-ring chain makes use of longer pins than a regular roller chain. When making use of multiplex O-ring chain, the conventional sprocket for multiplex chains cannot be utilised.
Caution
O-ring chain just isn’t proposed in applications the place solvents or other substances might assault “Nitric Rubber”. Special materials O-rings may also be available for these situations: Please check with us for details. Usually, “Nitric Rubber” is damaged by make contact with using the following chemical materials.