1.Output Hubs
Regular or alternate hubs with metric bores are available to suit inter national shaft diameters.
2. Precision Good quality Gearing
Computer Designed Helical Gear. Powerful Alloy Materials for High Load Capacity, Case Carburized for long existence, Ground Profile (some intermediate pinions are shaved), Crown tooth Profile, In Conformance with ISO 1328-1997, 98% Efficiency for per Stage, Smooth Quiet Operation with Teeth in Mesh.
3.Maximum Capability Housing Style
Close Grain Cast Iron Building, Superb Vibration Dampening & shock Resistance features, Precision Bored and Dowelled to Ensu?oe Accurate In¨°?line Assembly.
4.Strong Alloy Steel Shafts
Strong Alloy Steel, Hardened, Ground on journals, Gear Seatings and Extensions, for Maximum Load and Maximum Torsional Loads, Generous Sizes Shaft Keys for Shock Loading and Conform to ISO Standards.
5.Additional Case Lugs(Except H and J Gear Situation)
Eliminates the Need for Critical Tightening of Torque arm Bolts, Controls Position of Regular Torque Arm Mounting within Recommended limits.
6.Backstops
Option Parts, Anti-run Back Device, Can be found on all 13:1 and 20:1 Ratio units and do not recommend for 5:1 Units.
7.Bearing and Oil seals
Bearing are Adequately Proportioned and Conform to ISO dimension plan, Readily Out there World-wide, Oil seals are Double Lipped Garter Spring Type, Ensuring Effective Oil Sealing.
8.Rubberised End Caps
Self Sealing Intermediate Cover Plates, to Normal ISO Housing Dimensions.
9. Torque Arm Assembly
For Easy Adjustment of the Belt

General Description
Equiped with a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves plus a tank, this energy unit can drive a double acting cylinder to extend and retract without a directional solenoid valve. It truly is generally utilized in recre-ational automobiles, pleasure boats and moveable phases, and so forth.
Special Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned before set up of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and free of impurities. N46 hydraulic oil is encouraged.
4. The energy unit proven is created to be mounted horizontally.
five. Oil altering is required right after the original 100 operation hours, afterwards when every single 3000 hrs.
6. Check the oil degree within the tank after the original operating on the electrical power unit.

General Description
Equiped that has a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves in addition to a tank, this electrical power unit can drive a double acting cylinder to lengthen and retract without a directional solenoid valve. It can be generally utilized in recre-ational automobiles, pleasure boats and transportable phases, and so forth.
Distinctive Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned in advance of set up of the power unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which ought to also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
4. The electrical power unit proven is designed to be mounted horizontally.
5. Oil modifying is needed soon after the original a hundred operation hrs, afterwards as soon as every single 3000 hours.
six. Check the oil level within the tank soon after the initial operating in the power unit.

Power UNITS FOR LIFT TABLE 1
Standard Description
This power unit is created solely for your small lift table,Consisting of substantial strain gear pump, AC motor, multi-functional manifold, valves, tank, and so forth. This power unit is broadly made use of within the marketplace of logistic products such as minifork lift, scissors lift and ariel doing work platforms. The lower-ing motion is managed by the solenoid valve together with the pace controlled by the adjustable needle valve.
Electrical power UNITS FOR LIFT TABLE 2
General Description
This electrical power unit is designed exclusively for that medium lift table, Consisting of really effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The decreasing motion is actived by the solenoid valve as well as the velocity controlled from the adjustable needle valve. When the lift rises to a large positoin, but the power supply is minimize, the decreasing movement is controlled from the manual override function.
Energy UNITS FOR LIFT TABLE three
Basic Description
This power unit is designed exclusively to the substantial lift table, Consisting of highly effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing movement is actived from the solenoid valve and also the pace managed by a strain compensated movement manage valve.
Power UNITS FOR LIFT TABLE 4
General Description
This power unit is designed solely for the massive lift table, Consisting of highly effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing movement is actived by the solenoid valve and also the speed managed by the adjustable needle valve. Once the lift rises to a higher positoin, but the energy supply is lower, the reducing movement is controlled from the manual override function.
Special Notes
one. This power unit is of S3 duty cycle, which could only do the job intermittently and repeatedly, i.e. 1 minute on and 9 minutes off.
two. Clean all of the hydraulic parts concerned before set up of the power unit.
3. Viscosity of the oil shoud be 15~46 cst,which need to also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
4. Oil shifting is needed immediately after the initial 100 operation hours,afterwards the moment just about every 3000 hours.
5. The power unit proven is built to be mounted vertically.

Power UNITS FOR DOCK LEVELER one
Standard Description
This Dock leveler energy unit simply just raised the ramp when the motor is activated, when the ramp has reached complete extension the sequence shifts to extend the lip. The ramp and lip are lowered by separate solenoid valves when the descent. Both the ramp and lip f of every functions are managed by a needle valve. The needle valves are adjustable to attain the wanted descent velocity of each perform.

Power UNITS FOR DOCK LEVELER 2
General Description
This Dock leveler power unit basically raised the ramp once the motor is activated, when the ramp has reached full extension the sequence shifts to extend the lip. The ramp and lip are lowered by separate solenoid valves when the descent. Each the ramp and lip f of every functions are controlled by a needle valve. The needle valves are adjustable to accomplish the sought after descent speed of each function.

Energy UNITS FOR DOCK LEVELER three
General Description
This Dock leveler energy unit only raised the ramp once the motor is activated, once the ramp has reached full extension the sequence shifts to extend the lip. The ramp and lip are lowered by separate solenoid valves although the descent. Each the ramp and lip f of every functions are managed by a needle valve. The needle valves are adjustable to achieve the desired descent velocity of each function. The 2nd relief valve guarantees the primary platform to become floating below load once the dock leveler is being used for loading and unloading the products, as a result guarding the dock leveler efficiently.

Standard Description
This power unit features a long lasting magnet motor which has a power up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve using the reducing pace managed from the pressure compensated flow manage valve. Solutions of this series can be widely used in the sector of logistic units such as fork lift, mini lift table, and so forth.
Unique Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic elements concerned just before set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities. N46 hydraulic oil is advisable.
4. This power unit is created to be mounted vertically.
5. Check the oil degree within the tank right after the 1st star in the energy unit.
6. Oil shifting is needed following the first 100 operation hrs,afterwards the moment every 3000 hours.
seven. More pump sizes and tank sizes are avaiable upon request.

Materials Dealing with Electrical power UNIT two
Standard Description
This power unit functions energy up gravity down circuit. Activate the get started solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the decreasing speed managed through the pressure compensated flow control valve. Merchandise of this series might be extensively utilized in the marketplace of logistic gadgets like fork lift, mini lift table, and so on.
Distinctive Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic components concerned in advance of mounting the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which really should also be clean and cost-free of impurities, N46 hydraulic oil is proposed .
four. Oil modifying is needed after the first a hundred operation hours,afterwards once every single 3000 hours.
5. The energy unit ought to be mounted horizontally.

Materials Dealing with Energy UNIT one
Basic Description
This energy unit is made for that fork lift marketplace, consisting of extremely productive gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down movement are controlled through the lever from the manual release valve, that is outfitted with an electric switch to activate the motor. The lowing speed is controlled through the pressure compensated flow manage valve.
Special Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned just before set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and no cost of impurities, N46 hydraulic oil is proposed .
four. Oil altering is needed right after the initial a hundred operation hrs, afterwards as soon as every single 3000 hrs.
5. The power unit proven is built to be mounted horizontally.

Basic Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is created to operate material managing products. The reducing motion is achived by the solenoid valve with the reducing velocity controlled by an adjustable needle valve. The left and appropriate functions are equipped using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please seek the advice of our income engineer to the diverse pump displacement, motor energy or tank capability.
Exclusive Notes
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean all the hydraulic components concerned prior to set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
4. This energy unit need to be mounted horizontal.
5. Check the oil level in the tank soon after the primary start out with the electrical power unit.
six. Oil modifying is needed after the preliminary one hundred operation hrs, afterwards after just about every 3000 hrs.

DUMP TRAILER Power UNIT-DOUBLE ACTING
Common Description
This power unit has a energy up electrical power down circuit with load holding on the two A & B ports. A pressure compensatred movement management is usually added to circuit to control the decent speed of the cylinder.
Specific Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned before installation of the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and absolutely free of impurities. N46 hydraulic oil is encouraged.
4. The energy unit really should be mounted horizontally.
5. Check the oil degree within the tank immediately after the initial operating of the power unit.
6. Oil modifying is required soon after the preliminary one hundred operation hrs, afterwards when just about every 3000 hours.

DUMP TRAILER Energy UNIT- SINGLE ACTING
Basic Description
This energy unit includes a power up gravity down circuit. Start the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Guide override to solenoid valve could be supplied if demanded. Also a pressure compen sated movement manage may be added towards the circuit to regulate the descent speed from the cylinder.
Remark: Please seek the advice of our product sales engineer for the various pump displacement, motor energy or tank capacity.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic elements concerned prior to set up of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and free of charge of impurities.N46 hydraulic oil is advised.
4. The power unit must be mounted horizontally.
five. Check the oil level while in the tank just after the first running in the energy unit.
6. Oil altering is required soon after the first a hundred operation hrs, afterwards the moment just about every 3000 hrs.

General Description
Equipped using the zero leak bidirectional checking sole-noid valves, this energy unit is built for that operation of two independent circuits. Which are respectively for your principal and subordinate platforms of the double scissors lift. Two cut-off valves are utilized for reducing the machine manually in situation of energy loss. If more independent circuits are required to your application please contact us for availability.
Remark: one. Please talk to our sales engineer for your distinctive pump displacement, motor electrical power or tank capacity.
2. CSA or UL certified motors can be found upon request.
Distinctive Notes
one. The AC motor is of S3 duty cycle, which may only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all of the hydraulic components concerned in advance of installation of the energy unit.
3. Viscosity of the oil shoud be 15~46 cst,plus the oil really should be clean and free of charge of impurities,N46 hydraulic oil is advisable.
four. The power unit really should be mounted vertically.
5. Check the oil degree in the tank following the initial running of your power unit.
6. Oil shifting is required soon after the first one hundred operation hrs,afterwards once every 3000 hrs.