Product Description
| OE | 9757101104 |
| Vehicle model | Panamera 970 |
We are committed to the production and research and development of transmission shafts, as well as the sales of mid to high-end automotive transmission shafts. We serve high-quality customers with high-quality products. At present, we mainly produce Mercedes Benz, BMW, Audi, Volkswagen, Porsche, Volvo, Land Rover, Jaguar, Maserati, Ferrari, Lamborghini, and Bentley
Reasons for choosing us
1. High quality (quieter to move)
2. After sales worry free (one-on-1 service)
3. Factory direct sales (bypassing intermediaries)
4. Support for 1 custom thread
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 12 Months |
|---|---|
| Condition: | New |
| Color: | Black |
| Certification: | ISO |
| Type: | Drive Shaft |
| Application Brand: | Porsche |
| Samples: |
US$ 120/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Are there any limitations or disadvantages associated with drive shafts?
While drive shafts are widely used and offer several advantages, they also have certain limitations and disadvantages that should be considered. Here’s a detailed explanation of the limitations and disadvantages associated with drive shafts:
1. Length and Misalignment Constraints:
Drive shafts have a maximum practical length due to factors such as material strength, weight considerations, and the need to maintain rigidity and minimize vibrations. Longer drive shafts can be prone to increased bending and torsional deflection, leading to reduced efficiency and potential driveline vibrations. Additionally, drive shafts require proper alignment between the driving and driven components. Misalignment can cause increased wear, vibrations, and premature failure of the drive shaft or its associated components.
2. Limited Operating Angles:
Drive shafts, especially those using U-joints, have limitations on operating angles. U-joints are typically designed to operate within specific angular ranges, and operating beyond these limits can result in reduced efficiency, increased vibrations, and accelerated wear. In applications requiring large operating angles, constant velocity (CV) joints are often used to maintain a constant speed and accommodate greater angles. However, CV joints may introduce higher complexity and cost compared to U-joints.
3. Maintenance Requirements:
Drive shafts require regular maintenance to ensure optimal performance and reliability. This includes periodic inspection, lubrication of joints, and balancing if necessary. Failure to perform routine maintenance can lead to increased wear, vibrations, and potential driveline issues. Maintenance requirements should be considered in terms of time and resources when using drive shafts in various applications.
4. Noise and Vibration:
Drive shafts can generate noise and vibrations, especially at high speeds or when operating at certain resonant frequencies. Imbalances, misalignment, worn joints, or other factors can contribute to increased noise and vibrations. These vibrations may affect the comfort of vehicle occupants, contribute to component fatigue, and require additional measures such as dampers or vibration isolation systems to mitigate their effects.
5. Weight and Space Constraints:
Drive shafts add weight to the overall system, which can be a consideration in weight-sensitive applications, such as automotive or aerospace industries. Additionally, drive shafts require physical space for installation. In compact or tightly packaged equipment or vehicles, accommodating the necessary drive shaft length and clearances can be challenging, requiring careful design and integration considerations.
6. Cost Considerations:
Drive shafts, depending on their design, materials, and manufacturing processes, can involve significant costs. Customized or specialized drive shafts tailored to specific equipment requirements may incur higher expenses. Additionally, incorporating advanced joint configurations, such as CV joints, can add complexity and cost to the drive shaft system.
7. Inherent Power Loss:
Drive shafts transmit power from the driving source to the driven components, but they also introduce some inherent power loss due to friction, bending, and other factors. This power loss can reduce overall system efficiency, particularly in long drive shafts or applications with high torque requirements. It is important to consider power loss when determining the appropriate drive shaft design and specifications.
8. Limited Torque Capacity:
While drive shafts can handle a wide range of torque loads, there are limits to their torque capacity. Exceeding the maximum torque capacity of a drive shaft can lead to premature failure, resulting in downtime and potential damage to other driveline components. It is crucial to select a drive shaft with sufficient torque capacity for the intended application.
Despite these limitations and disadvantages, drive shafts remain a widely used and effective means of power transmission in various industries. Manufacturers continuously work to address these limitations through advancements in materials, design techniques, joint configurations, and balancing processes. By carefully considering the specific application requirements and potential drawbacks, engineers and designers can mitigate the limitations and maximize the benefits of drive shafts in their respective systems.
How do drive shafts enhance the performance of automobiles and trucks?
Drive shafts play a significant role in enhancing the performance of automobiles and trucks. They contribute to various aspects of vehicle performance, including power delivery, traction, handling, and overall efficiency. Here’s a detailed explanation of how drive shafts enhance the performance of automobiles and trucks:
1. Power Delivery:
Drive shafts are responsible for transferring power from the engine to the wheels, enabling the vehicle to move forward. By efficiently transmitting power without significant losses, drive shafts ensure that the engine’s power is effectively utilized, resulting in improved acceleration and overall performance. Well-designed drive shafts with minimal power loss contribute to the vehicle’s ability to deliver power to the wheels efficiently.
2. Torque Transfer:
Drive shafts facilitate the transfer of torque from the engine to the wheels. Torque is the rotational force that drives the vehicle forward. High-quality drive shafts with proper torque conversion capabilities ensure that the torque generated by the engine is effectively transmitted to the wheels. This enhances the vehicle’s ability to accelerate quickly, tow heavy loads, and climb steep gradients, thereby improving overall performance.
3. Traction and Stability:
Drive shafts contribute to the traction and stability of automobiles and trucks. They transmit power to the wheels, allowing them to exert force on the road surface. This enables the vehicle to maintain traction, especially during acceleration or when driving on slippery or uneven terrain. The efficient power delivery through the drive shafts enhances the vehicle’s stability by ensuring balanced power distribution to all wheels, improving control and handling.
4. Handling and Maneuverability:
Drive shafts have an impact on the handling and maneuverability of vehicles. They help establish a direct connection between the engine and the wheels, allowing for precise control and responsive handling. Well-designed drive shafts with minimal play or backlash contribute to a more direct and immediate response to driver inputs, enhancing the vehicle’s agility and maneuverability.
5. Weight Reduction:
Drive shafts can contribute to weight reduction in automobiles and trucks. Lightweight drive shafts made from materials such as aluminum or carbon fiber-reinforced composites reduce the overall weight of the vehicle. The reduced weight improves the power-to-weight ratio, resulting in better acceleration, handling, and fuel efficiency. Additionally, lightweight drive shafts reduce the rotational mass, allowing the engine to rev up more quickly, further enhancing performance.
6. Mechanical Efficiency:
Efficient drive shafts minimize energy losses during power transmission. By incorporating features such as high-quality bearings, low-friction seals, and optimized lubrication, drive shafts reduce friction and minimize power losses due to internal resistance. This enhances the mechanical efficiency of the drivetrain system, allowing more power to reach the wheels and improving overall vehicle performance.
7. Performance Upgrades:
Drive shaft upgrades can be a popular performance enhancement for enthusiasts. Upgraded drive shafts, such as those made from stronger materials or with enhanced torque capacity, can handle higher power outputs from modified engines. These upgrades allow for increased performance, such as improved acceleration, higher top speeds, and better overall driving dynamics.
8. Compatibility with Performance Modifications:
Performance modifications, such as engine upgrades, increased power output, or changes to the drivetrain system, often require compatible drive shafts. Drive shafts designed to handle higher torque loads or adapt to modified drivetrain configurations ensure optimal performance and reliability. They enable the vehicle to effectively harness the increased power and torque, resulting in improved performance and responsiveness.
9. Durability and Reliability:
Robust and well-maintained drive shafts contribute to the durability and reliability of automobiles and trucks. They are designed to withstand the stresses and loads associated with power transmission. High-quality materials, appropriate balancing, and regular maintenance help ensure that drive shafts operate smoothly, minimizing the risk of failures or performance issues. Reliable drive shafts enhance the overall performance by providing consistent power delivery and minimizing downtime.
10. Compatibility with Advanced Technologies:
Drive shafts are evolving in tandem with advancements in vehicle technologies. They are increasingly being integrated with advanced systems such as hybrid powertrains, electric motors, and regenerative braking. Drive shafts designed to work seamlessly with these technologies maximize their efficiency and performance benefits, contributing to improved overall vehicle performance.
In summary, drive shafts enhance the performance of automobiles and trucks by optimizing power delivery, facilitating torque transfer, improving traction and stability, enhancing handling and maneuverability, reducing weight, increasing mechanical efficiency,and enabling compatibility with performance upgrades and advanced technologies. They play a crucial role in ensuring efficient power transmission, responsive acceleration, precise handling, and overall improved performance of vehicles.
What benefits do drive shafts offer for different types of vehicles and equipment?
Drive shafts offer several benefits for different types of vehicles and equipment. They play a crucial role in power transmission and contribute to the overall performance, efficiency, and functionality of various systems. Here’s a detailed explanation of the benefits that drive shafts provide:
1. Efficient Power Transmission:
Drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. By connecting the engine or motor to the driven system, drive shafts efficiently transfer rotational power, allowing vehicles and equipment to perform their intended functions. This efficient power transmission ensures that the power generated by the engine is effectively utilized, optimizing the overall performance and productivity of the system.
2. Versatility:
Drive shafts offer versatility in their applications. They are used in various types of vehicles, including cars, trucks, motorcycles, and off-road vehicles. Additionally, drive shafts are employed in a wide range of equipment and machinery, such as agricultural machinery, construction equipment, industrial machinery, and marine vessels. The ability to adapt to different types of vehicles and equipment makes drive shafts a versatile component for power transmission.
3. Torque Handling:
Drive shafts are designed to handle high levels of torque. Torque is the rotational force generated by the engine or power source. Drive shafts are engineered to efficiently transmit this torque without excessive twisting or bending. By effectively handling torque, drive shafts ensure that the power generated by the engine is reliably transferred to the wheels or driven components, enabling vehicles and equipment to overcome resistance, such as heavy loads or challenging terrains.
4. Flexibility and Compensation:
Drive shafts provide flexibility and compensation for angular movement and misalignment. In vehicles, drive shafts accommodate the movement of the suspension system, allowing the wheels to move up and down independently. This flexibility ensures a constant power transfer even when the vehicle encounters uneven terrain. Similarly, in machinery, drive shafts compensate for misalignment between the engine or motor and the driven components, ensuring smooth power transmission and preventing excessive stress on the drivetrain.
5. Weight Reduction:
Drive shafts contribute to weight reduction in vehicles and equipment. Compared to other forms of power transmission, such as belt drives or chain drives, drive shafts are typically lighter in weight. This reduction in weight helps improve fuel efficiency in vehicles and reduces the overall weight of equipment, leading to enhanced maneuverability and increased payload capacity. Additionally, lighter drive shafts contribute to a better power-to-weight ratio, resulting in improved performance and acceleration.
6. Durability and Longevity:
Drive shafts are designed to be durable and long-lasting. They are constructed using materials such as steel or aluminum, which offer high strength and resistance to wear and fatigue. Drive shafts undergo rigorous testing and quality control measures to ensure their reliability and longevity. Proper maintenance, including lubrication and regular inspections, further enhances their durability. The robust construction and long lifespan of drive shafts contribute to the overall reliability and cost-effectiveness of vehicles and equipment.
7. Safety:
Drive shafts incorporate safety features to protect operators and bystanders. In vehicles, drive shafts are often enclosed within a protective tube or housing, preventing contact with moving parts and reducing the risk of injury in the event of a failure. Similarly, in machinery, safety shields or guards are commonly installed around exposed drive shafts to minimize the potential hazards associated with rotating components. These safety measures ensure the well-being of individuals operating or working in proximity to vehicles and equipment.
In summary, drive shafts offer several benefits for different types of vehicles and equipment. They enable efficient power transmission, provide versatility in various applications, handle torque effectively, offer flexibility and compensation, contribute to weight reduction, ensure durability and longevity, and incorporate safety features. By providing these advantages, drive shafts enhance the performance, efficiency, reliability, and safety of vehicles and equipment across a wide range of industries.
editor by CX 2024-03-04
China Good quality Applicable to Porsche Panamera Drive Shaft 970 Series 97042101102 97042101104 Panamera Drive Shaft Universal Joint Disc Ball Cage Dust Cover Bearing
Product Description
| OE | 9757101104 |
| Vehicle model | Panamera 970 |
We are committed to the production and research and development of transmission shafts, as well as the sales of mid to high-end automotive transmission shafts. We serve high-quality customers with high-quality products. At present, we mainly produce Mercedes Benz, BMW, Audi, Volkswagen, Porsche, Volvo, Land Rover, Jaguar, Maserati, Ferrari, Lamborghini, and Bentley
Reasons for choosing us
1. High quality (quieter to move)
2. After sales worry free (one-on-1 service)
3. Factory direct sales (bypassing intermediaries)
4. Support for 1 custom thread
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 12 Months |
|---|---|
| Condition: | New |
| Color: | Black |
| Certification: | ISO |
| Type: | Drive Shaft |
| Application Brand: | Porsche |
| Samples: |
US$ 120/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What maintenance practices are crucial for prolonging the lifespan of drive shafts?
To prolong the lifespan of drive shafts and ensure their optimal performance, several maintenance practices are crucial. Regular maintenance helps identify and address potential issues before they escalate, reduces wear and tear, and ensures the drive shaft operates smoothly and efficiently. Here are some essential maintenance practices for prolonging the lifespan of drive shafts:
1. Regular Inspection:
Performing regular inspections is vital for detecting any signs of wear, damage, or misalignment. Inspect the drive shaft visually, looking for cracks, dents, or any signs of excessive wear on the shaft itself and its associated components such as joints, yokes, and splines. Check for any signs of lubrication leaks or contamination. Additionally, inspect the fasteners and mounting points to ensure they are secure. Early detection of any issues allows for timely repairs or replacements, preventing further damage to the drive shaft.
2. Lubrication:
Proper lubrication is essential for the smooth operation and longevity of drive shafts. Lubricate the joints, such as universal joints or constant velocity joints, as recommended by the manufacturer. Lubrication reduces friction, minimizes wear, and helps dissipate heat generated during operation. Use the appropriate lubricant specified for the specific drive shaft and application, considering factors such as temperature, load, and operating conditions. Regularly check the lubrication levels and replenish as necessary to ensure optimal performance and prevent premature failure.
3. Balancing and Alignment:
Maintaining proper balancing and alignment is crucial for the lifespan of drive shafts. Imbalances or misalignments can lead to vibrations, accelerated wear, and potential failure. If vibrations or unusual noises are detected during operation, it is important to address them promptly. Perform balancing procedures as necessary, including dynamic balancing, to ensure even weight distribution along the drive shaft. Additionally, verify that the drive shaft is correctly aligned with the engine or power source and the driven components. Misalignment can cause excessive stress on the drive shaft, leading to premature failure.
4. Protective Coatings:
Applying protective coatings can help prolong the lifespan of drive shafts, particularly in applications exposed to harsh environments or corrosive substances. Consider using coatings such as zinc plating, powder coating, or specialized corrosion-resistant coatings to enhance the drive shaft’s resistance to corrosion, rust, and chemical damage. Regularly inspect the coating for any signs of degradation or damage, and reapply or repair as necessary to maintain the protective barrier.
5. Torque and Fastener Checks:
Ensure that the drive shaft’s fasteners, such as bolts, nuts, or clamps, are properly torqued and secured according to the manufacturer’s specifications. Loose or improperly tightened fasteners can lead to excessive vibrations, misalignment, or even detachment of the drive shaft. Periodically check and retighten the fasteners as recommended or after any maintenance or repair procedures. Additionally, monitor the torque levels during operation to ensure they remain within the specified range, as excessive torque can strain the drive shaft and lead to premature failure.
6. Environmental Protection:
Protecting the drive shaft from environmental factors can significantly extend its lifespan. In applications exposed to extreme temperatures, moisture, chemicals, or abrasive substances, take appropriate measures to shield the drive shaft. This may include using protective covers, seals, or guards to prevent contaminants from entering and causing damage. Regular cleaning of the drive shaft, especially in dirty or corrosive environments, can also help remove debris and prevent buildup that could compromise its performance and longevity.
7. Manufacturer Guidelines:
Follow the manufacturer’s guidelines and recommendations for maintenance practices specific to the drive shaft model and application. The manufacturer’s instructions may include specific intervals for inspections, lubrication, balancing, or other maintenance tasks. Adhering to these guidelines ensures that the drive shaft is properly maintained and serviced, maximizing its lifespan and minimizing the risk of unexpected failures.
By implementing these maintenance practices, drive shafts can operate reliably, maintain efficient power transmission, and have an extended service life, ultimately reducing downtime and ensuring optimal performance in various applications.
How do drive shafts enhance the performance of automobiles and trucks?
Drive shafts play a significant role in enhancing the performance of automobiles and trucks. They contribute to various aspects of vehicle performance, including power delivery, traction, handling, and overall efficiency. Here’s a detailed explanation of how drive shafts enhance the performance of automobiles and trucks:
1. Power Delivery: Drive shafts are responsible for transmitting power from the engine to the wheels, enabling the vehicle to move forward. By efficiently transferring power without significant losses, drive shafts ensure that the engine’s power is effectively utilized, resulting in improved acceleration and overall performance. Well-designed drive shafts with minimal power loss contribute to the vehicle’s ability to deliver power to the wheels efficiently.
2. Torque Transfer: Drive shafts facilitate the transfer of torque from the engine to the wheels. Torque is the rotational force that drives the vehicle forward. High-quality drive shafts with proper torque conversion capabilities ensure that the torque generated by the engine is effectively transmitted to the wheels. This enhances the vehicle’s ability to accelerate quickly, tow heavy loads, and climb steep gradients, thereby improving overall performance.
3. Traction and Stability: Drive shafts contribute to the traction and stability of automobiles and trucks. They transmit power to the wheels, allowing them to exert force on the road surface. This enables the vehicle to maintain traction, especially during acceleration or when driving on slippery or uneven terrain. The efficient power delivery through the drive shafts enhances the vehicle’s stability by ensuring balanced power distribution to all wheels, improving control and handling.
4. Handling and Maneuverability: Drive shafts have an impact on the handling and maneuverability of vehicles. They help establish a direct connection between the engine and the wheels, allowing for precise control and responsive handling. Well-designed drive shafts with minimal play or backlash contribute to a more direct and immediate response to driver inputs, enhancing the vehicle’s agility and maneuverability.
5. Weight Reduction: Drive shafts can contribute to weight reduction in automobiles and trucks. Lightweight drive shafts made from materials such as aluminum or carbon fiber-reinforced composites reduce the overall weight of the vehicle. The reduced weight improves the power-to-weight ratio, resulting in better acceleration, handling, and fuel efficiency. Additionally, lightweight drive shafts reduce the rotational mass, allowing the engine to rev up more quickly, further enhancing performance.
6. Mechanical Efficiency: Efficient drive shafts minimize energy losses during power transmission. By incorporating features such as high-quality bearings, low-friction seals, and optimized lubrication, drive shafts reduce friction and minimize power losses due to internal resistance. This enhances the mechanical efficiency of the drivetrain system, allowing more power to reach the wheels and improving overall vehicle performance.
7. Performance Upgrades: Drive shaft upgrades can be popular performance enhancements for enthusiasts. Upgraded drive shafts, such as those made from stronger materials or with enhanced torque capacity, can handle higher power outputs from modified engines. These upgrades allow for increased performance, such as improved acceleration, higher top speeds, and better overall driving dynamics.
8. Compatibility with Performance Modifications: Performance modifications, such as engine upgrades, increased power output, or changes to the drivetrain system, often require compatible drive shafts. Drive shafts designed to handle higher torque loads or adapt to modified drivetrain configurations ensure optimal performance and reliability. They enable the vehicle to effectively harness the increased power and torque, resulting in improved performance and responsiveness.
9. Durability and Reliability: Robust and well-maintained drive shafts contribute to the durability and reliability of automobiles and trucks. They are designed to withstand the stresses and loads associated with power transmission. High-quality materials, appropriate balancing, and regular maintenance help ensure that drive shafts operate smoothly, minimizing the risk of failures or performance issues. Reliable drive shafts enhance the overall performance by providing consistent power delivery and minimizing downtime.
10. Compatibility with Advanced Technologies: Drive shafts are evolving in tandem with advancements in vehicle technologies. They are increasingly being integrated with advanced systems such as hybrid powertrains, electric motors, and regenerative braking. Drive shafts designed to work seamlessly with these technologies maximize their efficiency and performance benefits, contributing to improved overall vehicle performance.
In summary, drive shafts enhance the performance of automobiles and trucks by optimizing power delivery, facilitating torque transfer, improving traction and stability, enhancing handling and maneuverability, reducing weight, increasing mechanical efficiency, enabling compatibility with performance upgrades and advanced technologies, and ensuring durability and reliability. They play a crucial role in ensuring efficient power transmission, responsive acceleration, precise handling, and overall improved performance of vehicles.
What is a drive shaft and how does it function in vehicles and machinery?
A drive shaft, also known as a propeller shaft or prop shaft, is a mechanical component that plays a critical role in transmitting rotational power from the engine to the wheels or other driven components in vehicles and machinery. It is commonly used in various types of vehicles, including cars, trucks, motorcycles, and agricultural or industrial machinery. Here’s a detailed explanation of what a drive shaft is and how it functions:
1. Definition and Construction: A drive shaft is a cylindrical metal tube that connects the engine or power source to the wheels or driven components. It is typically made of steel or aluminum and consists of one or more tubular sections with universal joints (U-joints) at each end. These U-joints allow for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components.
2. Power Transmission: The primary function of a drive shaft is to transmit rotational power from the engine or power source to the wheels or driven components. In vehicles, the drive shaft connects the transmission or gearbox output shaft to the differential, which then transfers power to the wheels. In machinery, the drive shaft transfers power from the engine or motor to various driven components such as pumps, generators, or other mechanical systems.
3. Torque and Speed: The drive shaft is responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). The drive shaft must be capable of transmitting the required torque without excessive twisting or bending and maintaining the desired rotational speed for efficient operation of the driven components.
4. Flexible Coupling: The U-joints on the drive shaft provide a flexible coupling that allows for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components. As the suspension system of a vehicle moves or the machinery operates on uneven terrain, the drive shaft can adjust its length and angle to accommodate these movements, ensuring smooth power transmission and preventing damage to the drivetrain components.
5. Length and Balance: The length of the drive shaft is determined by the distance between the engine or power source and the driven wheels or components. It should be appropriately sized to ensure proper power transmission and avoid excessive vibrations or bending. Additionally, the drive shaft is carefully balanced to minimize vibrations and rotational imbalances, which can cause discomfort, reduce efficiency, and lead to premature wear of drivetrain components.
6. Safety Considerations: Drive shafts in vehicles and machinery require proper safety measures. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts and reduce the risk of injury in the event of a malfunction or failure. Additionally, safety shields or guards are commonly installed around exposed drive shafts in machinery to protect operators from potential hazards associated with rotating components.
7. Maintenance and Inspection: Regular maintenance and inspection of drive shafts are essential to ensure their proper functioning and longevity. This includes checking for signs of wear, damage, or excessive play in the U-joints, inspecting the drive shaft for any cracks or deformations, and lubricating the U-joints as recommended by the manufacturer. Proper maintenance helps prevent failures, ensures optimal performance, and prolongs the service life of the drive shaft.
In summary, a drive shaft is a mechanical component that transmits rotational power from the engine or power source to the wheels or driven components in vehicles and machinery. It functions by providing a rigid connection between the engine/transmission and the driven wheels or components, while also allowing for angular movement and compensation of misalignment through the use of U-joints. The drive shaft plays a crucial role in power transmission, torque and speed delivery, flexible coupling, length and balance considerations, safety, and maintenance requirements. Its proper functioning is essential for the smooth and efficient operation of vehicles and machinery.
editor by CX 2024-02-06
China Drive Shaft Universal Joint Bearing Auto Parts Power Shaft drive shaft center bearing
Solution Description
Need adjustments the planet, technology sales opportunities the long term, HangZhou Auto Technology will preserve excellent high quality, revolutionary spirit, focused frame of mind, adhere to the growth of the automobile business, stand at the forefront of the instances, and step on the CZPT soil of modified autos and automobile components Extended sailing, the company is inclined to be part of fingers with folks from all walks of daily life to achieve mutual gain and produce a far better tomorrow.
|
US $5-50 / Piece | |
100 Pieces (Min. Order) |
###
| After-sales Service: | 7*24 |
|---|---|
| Condition: | New |
| Color: | Black |
| Certification: | CE, DIN, ISO |
| Type: | Universal Joint |
| Material: | Steel |
###
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
|
US $5-50 / Piece | |
100 Pieces (Min. Order) |
###
| After-sales Service: | 7*24 |
|---|---|
| Condition: | New |
| Color: | Black |
| Certification: | CE, DIN, ISO |
| Type: | Universal Joint |
| Material: | Steel |
###
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
How to tell if your driveshaft needs replacing
What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.
unbalanced
An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.
unstable
When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.
Unreliable
If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
Unreliable U-joints
A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.
damaged drive shaft
The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
Maintenance fees
The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.
editor by czh 2022-12-18
China Standard Wholesale customization FAW Jiefang Rear axle transmission shaft and universal joint assembly 2201010-1050/C a line drive shaft
OE NO.: 2257110-1050/C
Dimension: 19*19*63, L
Substance: iron, Iron
Warranty: 1 Years
Solution Name: Rear axle transmission shaft and universal joint
Coloration: black
Form: cylinder
Characteristic: difficult
MOQ: a hundred
Supply day: 7-20days,negotiable
Sample: Assist
Symbol: Settle for
Packaging Details: wood situation
Items Description Specification
| MOQ | 100 parts |
| Delivery date | 7-20days，negotiable |
| LOGO | accept |
| Place of Origin | China |
| Package | customized |
| Sample | wooden scenario |
Why Checking the Drive Shaft is Important
If you hear clicking noises while driving, your driveshaft may need repair. An experienced mechanic can tell if the noise is coming from one side or both sides. This problem is usually related to the torque converter. Read on to learn why it’s so important to have your driveshaft inspected by an auto mechanic. Here are some symptoms to look for. Clicking noises can be caused by many different things. You should first check if the noise is coming from the front or the rear of the vehicle.
hollow drive shaft
Hollow driveshafts have many benefits. They are light and reduce the overall weight of the vehicle. The largest manufacturer of these components in the world is CZPT. They also offer lightweight solutions for various applications, such as high-performance axles. CZPT driveshafts are manufactured using state-of-the-art technology. They offer excellent quality at competitive prices.
The inner diameter of the hollow shaft reduces the magnitude of the internal forces, thereby reducing the amount of torque transmitted. Unlike solid shafts, hollow shafts are getting stronger. The material inside the hollow shaft is slightly lighter, which further reduces its weight and overall torque. However, this also increases its drag at high speeds. This means that in many applications hollow driveshafts are not as efficient as solid driveshafts.
A conventional hollow drive shaft consists of a first rod 14 and a second rod 14 on both sides. The first rod is connected with the second rod, and the second rod extends in the rotation direction. The two rods are then friction welded to the central area of the hollow shaft. The frictional heat generated during the relative rotation helps to connect the two parts. Hollow drive shafts can be used in internal combustion engines and environmentally-friendly vehicles.
The main advantage of a hollow driveshaft is weight reduction. The splines of the hollow drive shaft can be designed to be smaller than the outside diameter of the hollow shaft, which can significantly reduce weight. Hollow shafts are also less likely to jam compared to solid shafts. Hollow driveshafts are expected to eventually occupy the world market for automotive driveshafts. Its advantages include fuel efficiency and greater flexibility compared to solid prop shafts.
Cardan shaft
Cardan shafts are a popular choice in industrial machinery. They are used to transmit power from one machine to another and are available in a variety of sizes and shapes. They are available in a variety of materials, including steel, copper, and aluminum. If you plan to install one of these shafts, it is important to know the different types of Cardan shafts available. To find the best option, browse the catalog.
Telescopic or “Cardan” prop shafts, also known as U-joints, are ideal for efficient torque transfer between the drive and output system. They are efficient, lightweight, and energy-efficient. They employ advanced methods, including finite element modeling (FEM), to ensure maximum performance, weight, and efficiency. Additionally, the Cardan shaft has an adjustable length for easy repositioning.
Another popular choice for driveshafts is the Cardan shaft, also known as a driveshaft. The purpose of the driveshaft is to transfer torque from the engine to the wheels. They are typically used in high-performance car engines. Some types are made of brass, iron, or steel and have unique surface designs. Cardan shafts are available in inclined and parallel configurations.
Single Cardan shafts are a common replacement for standard Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to choose the 1310 series. This type is great for lifted jeeps and requires a CV-compatible transfer case. Some even require axle spacers. The dual Cardan shafts are also designed for lifts, which means it’s a good choice for raising and lowering jeeps.
universal joint
Cardan joints are a good choice for drive shafts when operating at a constant speed. Their design allows a constant angular velocity ratio between the input and output shafts. Depending on the application, the recommended speed limit may vary depending on the operating angle, transmission power, and application. These recommendations must be based on pressure. The maximum permissible speed of the drive shaft is determined by determining the angular acceleration.
Because gimbal joints don’t require grease, they can last a long time but eventually fail. If they are poorly lubricated or dry, they can cause metal-to-metal contact. The same is true for U-joints that do not have oil filling capability. While they have a long lifespan, it can be difficult to spot warning signs that could indicate impending joint failure. To avoid this, check the drive shaft regularly.
U-joints should not exceed seventy percent of their lateral critical velocity. However, if this speed is exceeded, the part will experience unacceptable vibration, reducing its useful life. To determine the best U-joint for your application, please contact your universal joint supplier. Typically, lower speeds do not require balancing. In these cases, you should consider using a larger pitch diameter to reduce axial force.
To minimize the angular velocity and torque of the output shaft, the two joints must be in phase. Therefore, the output shaft angular displacement does not completely follow the input shaft. Instead, it will lead or lag. Figure 3 illustrates the angular velocity variation and peak displacement lead of the gimbal. The ratios are shown below. The correct torque for this application is 1360 in-Ibs.
Refurbished drive shaft
Refurbished driveshafts are a good choice for a number of reasons. They are cheaper than brand new alternatives and generally just as reliable. Driveshafts are essential to the function of any car, truck, or bus. These parts are made of hollow metal tubes. While this helps reduce weight and expense, it is vulnerable to external influences. If this happens, it may crack or bend. If the shaft suffers this type of damage, it can cause serious damage to the transmission.
A car’s driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and related components. Their factory has the capability to refurbish and repair almost any make or model of driveshafts. Refurbished driveshafts are available for every make and model of vehicle. They can be found on the market for a variety of vehicles, including passenger cars, trucks, vans, and SUVs.
Unusual noises indicate that your driveshaft needs to be replaced. Worn U-joints and bushings can cause excessive vibration. These components cause wear on other parts of the drivetrain. If you notice any of these symptoms, please take your vehicle to the AAMCO Bay Area Center for a thorough inspection. If you suspect damage to the driveshaft, don’t wait another minute – it can be very dangerous.
The cost of replacing the drive shaft
The cost of replacing a driveshaft varies, but on average, this repair costs between $200 and $1,500. While this price may vary by vehicle, the cost of parts and labor is generally equal. If you do the repair yourself, you should know how much the parts and labor will cost before you start work. Some parts can be more expensive than others, so it’s a good idea to compare the cost of several locations before deciding where to go.
If you notice any of these symptoms, you should seek a repair shop immediately. If you are still not sure if the driveshaft is damaged, do not drive the car any distance until it is repaired. Symptoms to look for include lack of power, difficulty moving the car, squeaking, clanking, or vibrating when the vehicle is moving.
Parts used in drive shafts include center support bearings, slip joints, and U-joints. The price of the driveshaft varies by vehicle and may vary by model of the same year. Also, different types of driveshafts require different repair methods and are much more expensive. Overall, though, a driveshaft replacement costs between $300 and $1,300. The process may take about an hour, depending on the vehicle model.
Several factors can lead to the need to replace the drive shaft, including bearing corrosion, damaged seals, or other components. In some cases, the U-joint indicates that the drive shaft needs to be replaced. Even if the bearings and u-joints are in good condition, they will eventually break and require the replacement of the drive shaft. However, these parts are not cheap, and if a damaged driveshaft is a symptom of a bigger problem, you should take the time to replace the shaft.
in Rasht Iran (Islamic Republic of) sales price shop near me near me shop factory supplier Universal Joint Coupling Bellows Coupling Flexible Coupling Pto Shafts Transmission Part Couplings manufacturer best Cost Custom Cheap wholesaler
We are aiming to satisfy the calls for of the clients close to the entire world.. Innovative thermo treatment method tools, this kind of as community warmth therapy oven, multi-use thermo therapy oven, and so on. The substantial exact CNC products, this kind of as Sluggish-feeding wire-lower equipment, jig grinding equipment and electrical discharge machine, guarantees the leading good quality precision of mould processing, with the large efficient and environmental security acid rolling line getting the premier raw substance changing products in the field in china The wildly use of automated milling device, substantial-velocity automatic feeding punch, high speed automatic rolling and assembling machine assures the large top quality and efficiency of components and chain creating. EPTTngdao yechen EPT EPTT EPTT, Ltd. is situated in the beautiful coastal city of EPTTngdao. We have been concentrating on the R amp D, creation and product sales of EPTT EPTT parts. At existing, the main goods are diaphragm coupling, plum coupling, cross sliEPTTcoupling, EPTows coupling, and so forth
Considering that its establishment, our business has been committed to the deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment and innovation of EPTT EPTT. The company adheres to the EPTTrprise spirit of quotcollege, pragmatic, rigorous and progressive quot, and is dedicated to generating outstanding goods in manufacturing facility EPTT parts. Up to now, EPT has EPTTed machining cEPTTrs, data EPTT tools, CNC milling EPTTs and CNC reducing and other EPTd machining equipment. At existing, our items are offered to large domestic EPTTrprises and exported to Europe, The us, Africa and SouthEPT Asia. And get praise and welcome from clients.
Bellows coupling
Workshop
Tests instrument
Place of work
specification
EPTT and delivery
in Panipat India sales price shop near me near me shop factory supplier Slip Yoke Light Drive Shaft Agricultural Tractor Clutch Spline Joint Cardan Shaft Couplings Cross Drive Universal Propeller Metal manufacturer best Cost Custom Cheap wholesaler
We also can style and make non-regular merchandise to satisfy customers’ specific needs. makes certain the stability and consistency of the important perform of parts. We are aiming to satisfy the needs of the clientele around the entire world..
Slip Yoke LigEPTT Push Shaft
Our PTO EPT shafts are created to satisfy distinct demands with the most affordable layout.
Tractor Conclude: one-three/8 quot x six Spline, Quick Disconnect
EPTTlement Stop: 1-3/8 quot Spherical with one/two quot Shear Bolt/ Attachment Pin Hole
Compressed Length: fifty six-3/16 quot
All round EPTmmended Max Running Length: 82 quot (Calculated with one/three shaft overlap)
EPT Stock Amount: 14001406
The shortest size measurement is taken from the finishes of yokes when fully compressed.
The extended length is an XiHu (West EPT) Dis.Hu (West EPT) Dis.line based on mainXiHu (West EPT) Dis.Hu (West EPT) Dis. at lEPT one/three shaft duration overlap.
Proportions are in inches.
| Model Variety | SP48 |
| Purpose | EPTT EPTT |
| Use | Tractors and numerous farm implements |
| Spot of Origin | EPTT, EPTT (Mainland) |
| Manufacturer Title | EPT |
| Yoke Type | thrust pin/quick release/ball attachment/collar/double thrust pin/bolt pins/spEPTT pins |
| Processing Of Yoke | EPT |
| Plastic EPTT | YWBWYSBS |
| EPTT | Yellowblack |
| Collection | 1S2S3S4S5S6S7S8S9S10S38S48S36 |
| EPT Sort | Trianglar/star/lemon |
| Processing Of EPT | Chilly drawn |
| Spline Sort | one three/8 quot Z6 one 3/eight Z21 1 three/four Z201 one/eight Z6 1 3/4 Z6 8*42*48*8 8*32*38*six |
Best near me made in China – replacement parts – PTO shaft manufacturer & factory Reduce pto shaft universal joint sizes Speed Worm Gearbox with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto manufacturing unit in China with 5 various branches. For far more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
gmc sierra travel shaft EPG ford naa pto shaft size is pto shaft for kubota tractor inclined 1000 pto spline to 2005 dodge ram 1500 drive shaft cooperate 2006 bmw 325i push shaft sincerely drive shaft keyway and pto shaft protect removing produce king kutter pto shaft duration frequently plastic pto shaft protect with pals! Our goods are marketing nicely in Chinese markets and some items sold in intercontinental marketplaces are nicely gained by Chinese and international consumers at home and overseas. Our lessen pace worm gearbox has a lot of products for your picking and we can create as per your drawing or sample to satisfy your EPT ask for
1&interval Large output torque
2&time period Secure&comma reputable&comma inexpensive and sturdy
3&interval EPT transmission&comma silent operation
4&interval Higher carrying capability
five&period of time Large modularization design and style&comma may possibly equip with a variety of outer electrical power enter conveniently&period of time Identical device variety could equip with numerous power motor&period of time It is straightforward to recognize the blend and junction in between every single equipment type
six&period Transmission ratio&colon Fine division&comma broad scope&time period The combined device kind may type quite huge transmission ratio&comma i&period of time E&period Output quite minimal rotary speed&period
seven&time period Form of installation&colon The position to be mounted is not minimal&interval
eight&period High energy&comma compact the box human body of higher toughness c EPT iron&comma gear and gear shaft adapts the gas carbonization&comma quenching and fine grinding procedure&comma as a result the bearing potential of unit quantity is higher&interval
nine&interval Lengthy existence&colon Under the situation of appropriate variety picked&lparincluding deciding on appropriate operation parament &rpar standard procedure and upkeep&comma the existence if major components velocity reducer&lparexcept wearing elements&rparshould not be considerably less than 20000 hrs&interval The sporting areas incorporate lubricating oil&comma oil seal and bearing&interval
10&interval Low sounds&colon Simply because main parts of speed reducer are processed&comma and examined critically&comma therefore the sounds of speed reducer is reduced&period
11&period of time Parallel axis-bevel wheel pace-down motor&period of time
See the under functions&colon
Measurement&colon 40mm—160mm
Reduction ratio&colon 3 — 512
Torque transmission&colon 5 Nm — 8 ninety five Nm
Precision backlash&colon ≤ 5arcmin
Operating noise&colon fifty one 70 dB &lparA&rpar
You are welcome to send us depth enquiry by e-mail or fax&time period
We can also source Gearbox&comma agricultural gearbox&comma planetary gearbox&comma worm gearbox&comma flender gearbox&comma marine gearbox&comma comer gearbox&comma reduction gearbox&comma transmission gearbox&comma sew gearbox&comma mower gearbox&comma rotary cutter gearbox&comma modest transmission gearbox&comma gearbox for conveyor&comma bevel gearbox&comma helical gearbox&comma swing gearbox&comma variable velocity gearbox&comma differential gearbox&comma little planetary gearbox&comma reducer gearbox&comma tiller gearbox&comma pto gearbox&comma gearbox reducer&comma hollow shaft gearbox&comma pace reduction gearbox&comma industrial gearbox&comma planetary reduction gearbox&comma lawn mower gearbox&comma rotary tiller gearbox&comma gearbox transmission&comma worm reduction gearbox&comma aluminum gearbox&comma forklift gearbox&comma nmrv 075 worm gearbox&comma nmrv030 worm gearbox&comma shaft mounted gearbox&comma nmrv 050 worm gearbox&comma gearbox for agricultural machinery&comma energy tiller gearbox&comma handbook worm gearbox&comma spiral bevel gearbox&comma nmrv gearbox&comma worm wheel gearbox&comma reduce velocity gearbox&comma industrial transmission gearbox&comma worm reducer gearbox&comma gearbox rpm reducer&comma helical gearbox reducer&comma wheel planetary gearbox&comma nmrv040 worm gearbox&comma worm gearbox reducer&comma nmrv worm gearbox&comma aluminium worm gearbox&comma gearbox reduction&comma rv sequence worm gearbox&comma worm pace gearbox&comma nmrv050 worm gearbox&comma equipment reducer&comma worm equipment reducer&comma helical gear reducer&comma equipment velocity reducer&comma worm gear pace reducer&comma shaft mounted gear reducer&comma planetary gear reducer&comma helical gear velocity reducer&comma worm gear wheel reducer&comma pace gear reducer&comma bevel gear reducer&comma planetary gear pace reducer&comma spur equipment reducer&comma aluminum worm equipment decrease&comma nmrv worm equipment reducers&comma helical-worm gear reducer&comma helical bevel equipment reducers&comma large velocity equipment reducer&comma gear velocity reducers&comma industrial equipment reducer&comma high torque gear reducers
Universal factory made in China – replacement parts – in Buffalo City South Africa Joint Steering Joint Coupling OE 45230-60010 for Land Cruiser 105 with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For much more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
FAQ
Q1. How do you make sure your good quality?
A: All products move strict multi inspection process. Every assembly shaft have dynamic balance te EPT to keep away from vibration. We have one hundred% te EPT prior to shipping and delivery,
Q2. What are your conditions of packing?
A: Typically, we pack our products in neutral we also can pack the merchandise in your branded bins soon after receiving your authorization letters.
Q3. Can you create according to the samples?
A: Of course, we can make by your samples or complex drawings. We can build the molds and fixtures.
Q4. What is your sample plan?
A: We can offer the sample if we have prepared areas in stock, but the customers have to spend the sample co EPT and the courier price.
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique gear manufacturer’s (OEM) component quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our company and the outlined substitute parts contained herein are not sponsored, accepted, or manufactured by the OEM.
Industrial Cost China pto shaft series Universal Joint Cardan Shaft Coupling with ce certificate top quality low price
We – EPG Team the largest agricultural gearbox and pto manufacturing facility in China with five diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft collection one na miata driveshaft EPG pto shaft collection dimensions is driveshaft yoke specialized changing a pto shaft in employed pto shaft design and style, fifty four inch driveshaft manufacturer tractor pto shaft components for sale and pto shaft dimension for ford 8n sales square pto shaft of agricultural equipment and farm implements, which has an unbiased import and export legal rights. Adhering to “Survival by Top quality, Advancement by Technological innovation & Credit score”, The firm will consistently boost solution efficiency to meet up with the growing customer demands in the demanding design of operate.
Cellular: +86~13083988828escopic flange extended cardan shaft Coupling(SWP-A)
SWP partition profile bearing the cross shaft universal coupling merchandise: alternative of bearings for, SWP variety cardan style bearing break up shaft bolt, ideal for hoisting and conveying equipment and other large equipment, connecting two various axis transmission shaft, axis angle of A~F variety not far more than ten levels, the G type is not better than 5 degrees.
♦Product Composition
♦Basic Parameter And Principal Dimension
| Kind | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Stretch size S mm |
Dimension(mm) | Rotary inertia kg·mtwo |
Mass kg |
|||||||||||
| Lmin | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | Lmin | Increase a hundred |
Lmin | Boost one hundred |
||||||
| SWP160A | 160 | 16 | 8 | ≤10 | fifty | 660 | one hundred forty | ninety five | 114 | fifteen | 4 | 20×12 | six | eighty five | 6-13 | .thirteen | .0059 | 47 | 2.1 |
| SWP180A | one hundred eighty | 20 | ten | ≤10 | sixty | 752 | one hundred fifty five | one hundred and five | 121 | 15 | four | 24×14 | 7 | ninety five | 6-15 | .22 | .0072 | 60 | 2.three |
| SWP200A | two hundred | 31.5 | 16 | ≤10 | 70 | 823 | a hundred seventy five | one hundred twenty five | 17 | seventeen | five | 28×16 | 8 | a hundred and ten | eight-15 | .37 | .0114 | eighty one | three.4 |
| SWP225A | 225 | forty | twenty | ≤10 | 76 | 933 | 196 | one hundred thirty five | 152 | twenty | five | 32×18 | nine | one hundred thirty | 8-seventeen | .63 | .5710 | 109 | 6.6 |
| SWP250A | 250 | sixty three | 31.5 | ≤10 | eighty | 978 | 218 | a hundred and fifty | 168 | twenty five | 5 | 40×25 | 12.five | 135 | 8-19 | one.02 | .0407 | 147 | 7.3 |
| SWP285A | 285 | 90 | forty five | ≤10 | 100 | 1133 | 245 | one hundred seventy | 194 | 27 | seven | 40×30 | fifteen | a hundred and fifty | eight-21 | two.17 | .0702 | 241 | 9.four |
| SWP315A | 315 | a hundred and forty | 63 | ≤10 | a hundred and ten | 1250 | 280 | 185 | 219 | 32 | seven | 40×30 | fifteen | 170 | ten-23 | three.86 | .1144 | 322 | 12. |
| SWP350A | 350 | one hundred eighty | ninety | ≤10 | a hundred and twenty | 1380 | 310 | 210 | 245 | 35 | eight | 50×32 | 16 | 185 | 10-23 | six.sixty six | .1663 | 428 | thirteen.six |
| SWP390A | 390 | 250 | 112 | ≤10 | one hundred twenty | 1495 | 345 | 235 | 273 | 40 | eight | 70×36 | 18 | 205 | ten-twenty five | 11.53 | .2695 | 566 | 18. |
| SWP435A | 435 | 355 | 160 | ≤10 | 150 | 1710 | 385 | 255 | 299 | 42 | ten | 80×40 | 20 | 235 | sixteen-28 | 21.eighty one | .3645 | 932 | 20. |
| SWP480A | 480 | 450 | 224 | ≤10 | 170 | 1910 | 425 | 275 | 351 | 47 | twelve | 90×45 | 22.five | 265 | 16-31 | 38.04 | .7571 | 1294 | 28. |
| SWP550A | 550 | 710 | 315 | ≤10 | one hundred ninety | 2135 | 492 | 320 | 402 | 50 | twelve | 100×45 | 22.5 | 290 | sixteen-31 | sixty one.28 | one.1842 | 1744 | 35.seven |
| SWP600A | 600 | 1000 | five hundred | ≤10 | 210 | 3580 | 544 | 380 | 450 | fifty five | fifteen | 90×55 | 27.5 | 360 | 22-34 | 98.sixty three | 1.7159 | 2330 | 40.five |
| SWP640A | 640 | 1250 | 630 | ≤10 | 230 | 2685 | 575 | 385 | 480 | 60 | fifteen | 100×60 | thirty | 385 | eighteen-38 | 167.67 | two.3080 | 3153 | forty eight.3 |
·Observe:L is the length of installation,which includes the worth of S/Z shrinkage.
♦Product Display
♦Cardan Shaft Kinds
We can source you SWP,SWC,WSD,WS common coupling as subsequent:
Welded shaft sort with size compensation / expansion joint
Brief variety with length compensation / expansion joint
Short variety with no length payment / expansion joint
Extended sort without having length payment / expansion joint
Double flange with size compensation / expansion joint
Long type with big length compensation / big enlargement joint
Super Short kind with size payment / expansion joint
♦Other Products List
| Transmission Machinery Areas Name |
Model |
| Universal Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| High Flexible Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Organization
Our organization supplies different sorts of goods. Large good quality and reasonable cost. We stick to the basic principle of “high quality 1st, provider first, constant advancement and innovation to satisfy the customers” for the administration and “zero defect, zero complaints” as the good quality goal. To EPT our provider, we give the products with excellent top quality at the sensible price.
Welcome to personalize goods from our factory and you should give your design drawings or make contact with us if you require other specifications.
♦Our Services
1.Design and style Services
Our design and style team has encounter in cardan shaft relating to item layout and growth. If you have any wants for your new solution or would like to make even more improvements, we are below to offer our support.
two.Merchandise Services
raw materia EPT → Cutting → Forging →Rough machining →Shot blasting →Heat therapy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Treatment
We could produce the sample in accordance to your need and amend the sample continually to meet your need.
4.Analysis & Development
We typically investigation the new demands of the industry and produce the new product when there is new autos in the market place.
5.High quality Management
Each stage should be EPT test by Skilled Workers according to the stHangZhourd of ISO9001 and TS16949.
♦FAQ
Q 1: Are you investing organization or company?
A: We are a professional maker specializing in production
a variety of collection of couplings.
Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the consumers with tailored artworks of PDF or AI structure.
Q 3:How long is your supply time?
Typically it is twenty-30 times if the products are not in stock. It is according to amount.
Q 4: Do you give samples ? Is it cost-free or extra ?
Indeed, we could offer the sample but not for free.In fact we have a very excellent price tag principle, when you make the bulk buy then value of sample will be deducted.
Q five: How long is your warranty?
A: Our Guarantee is twelve month under regular circumstance.
Q six: What is the MOQ?
A:Generally our MOQ is 1pcs.
Q seven: Do you have inspection procedures for coupling ?
A:one hundred% self-inspection just before packing.
Q 8: Can I have a visit to your manufacturing facility ahead of the get?
A: Sure,welcome to check out our manufacturing unit.
Q nine: What’s your payment?
A:1) T/T. 2) L/C
♦Speak to Us
Web:
Insert: No.1 HangZhou Highway,Chengnan park,HangZhou City,ZheJiang Province,China